Metal and Finishes

Standard Interior and Exterior Metal Finish

• 26 ga. acrylume

Optional Finishes Available

• 26 ga. painted stucco embossed galvanized steel

Standard Colors

• White, black and almond

Optional Metals Available By Request

• .032 or .040 stucco embossed aluminum
• .040 smooth white aluminum
• 22 or 20 Ga. Type 304 stainless steel #4 finish

Interior Floor Finishes

• .050 smooth aluminum
• 22 ga. type 304 stainless steel with #2B finish
• .100 aluminum diamond treadbrite

Other gauges and finishes are available upon request.

Insulation

Standard insulation is foamed-in-place Non-CFC U.L. Class 1 rated urethane foam.

Minimum “R” values
Cooler = R25, Freezer = R32

• Class 1 urethane foam has a flame spread of 25 or less overall and smoke developed of less than 450
• Recommended wall thickness is nominal 4″
• Foam rail panels also available in 5″ and 6″ thickness

Panel Construction

Walk-ins are all custom designed to fit the individual customers’ needs.

Each panel consists of an interior and exterior metal pan with structural, high density foam rail frame. These pans are separated by rigid foam-in place self-extinguishing urethane insulation which adheres to the interior of the pans providing increased structural strength.

All panels have tongue and groove construction and gasket is applied to all joints forming an air-tight seal.

Panel Fasteners

All panels are joined together using a camlocking fastener, operated with a hex wrench.

Access holes are sealed with vinyl snap-in caps.

Floorless Models

Screed is furnished for all floorless models.
Screeds are designed to be anchored to masonry floors to provide an accurate template for the erection of wall panels.

Floor Panels

Floor panels are built with metal bonded to exterior grade underlayment and foamed in place.
Capable of maintaining a load maximum of 1000lbs./sq/ft. when uniformly distributed, and are NSF approved.